UBI EasyCoder 201 II Spécifications télécharger pdf (Page 110)

Chapter 7— IPL Command Reference

94 IPL Programmer’s Reference Manual

Command Terminator 2

Purpose: Terminates the current command.

Syntax: <LF>

Configuration Parameters, Transmit

Purpose: Uploads the current configuration commands from the printer.

Syntax: <ESC>p

Notes: The printer transmits only the configuration parameters that you can set

from the host.

Use this command to view, edit, or copy the current configuration

command settings.

See your printer user’s manual for a list of the configuration parameters

that the printer uploads to the host.

Cut

Purpose: Advances the label out to the cutter and cuts the label stock.

Syntax: <SO>

Notes: This command is executed only if the cutter is installed but not enabled.

Use this command only after you have printed a batch of labels.

Data Shift – International Characters

Purpose: Allows you to enter selected command characters as data.

Syntax: <SUB> or <DLE>

Notes: In Emulation mode, this command shifts the next character (if not a

control character) into the upper character bank (setting the eighth bit to

1) to print international characters.

This command lets you enter selected command characters as data instead

of commands in both Advanced and Emulation mode. For example, use

this command to enter a <GS> or <CR> as data in a bar code or text field.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 269 270

Pas de commentaire

UBI EasyCoder 201 II Spécifications Page 110