UBI EasyCoder 201 II Spécifications télécharger pdf (Page 115)

Chapter 7— IPL Command Reference

IPL Programmer’s Reference Manual 99

Field Decrement, Set (continued)

Notes: In the section of data separated by <FS> or <GS>, the printer decrements

the values in data entry fields by n after it prints each batch.

The printer generates an error code (22) if the decrement value is out of

range.

Field Increment, Set

Purpose: Sets the increment value for the selected field.

Syntax: <ESC>In

where n is the increment value.

Printers:

Printer Default Values for n Notes

All n = 1 1 to 9999

All printers support this command the same

way.

Notes: In the section of data separated by <FS> or <GS>, the printer increments

the values in data entry fields by n after it prints each batch. You must use

this command when you are defining a format in Programming mode.

This example shows how to use the field increment command:

The printer generates an error code (22) if the increment value is out of

range.

First Data Entry Field, Select

Purpose: Sets the field pointer to the lowest numbered data entry field that can

accept Print mode data.

Syntax: <ACK>

Notes: This command ensures that data prints in the field with the lowest number

if you do not want to specify a data field by its field number.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 269 270

Pas de commentaire

UBI EasyCoder 201 II Spécifications Page 115